Rootstock and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing
Using easily and fastly. Grafting method than the traditional savings
The time and effort Blade can be replaced
Use the pruner to cut useless branches from the plant
For the knife
Materials: carbon steel, ABS and Aluminum
Cut grafting stocks from 5mm up to 1.4cm diameter
Trimming blades 3mm thick
Phillips screwdriver with red handle
Size 27cm * 10cm/10.5inch * 3.9inch
2 additional blades
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Keep out of reach of children do not use on dry or old hard wood
1 x Fruit Tree Pruning Shears Grafting Cutting Tool
1, high quality plastic film, self adhesive, no knot, save time and effort.
2, reduce labor costs, greatly improve the survival rate of products.
3, three widths are optional, free and Flexible
Name: high quality graft film
Material: PE film
Color: gray and green
Size: width 2CM/0.79″ , 2.5CM/0.98″ , 3CM/1.18″
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.